Gilsonite Oil-Based Sealer

Unit of Sale: 5 Gallon Pail, Bulk
Gilsonite re-saturates and rejuvenates blacktop surfaces, forming a lustrous jet black finish. This driveway coating protects against moisture and frost damage - your pavement’s worst enemies. Gilsonite Asphalt Seal is the easiest of the pavement sealers to apply, and it gives a deep, black finish with a bit of sheen. Unlike water base sealers, it will not be damaged by freezing weather, nor will it wash off if caught by a rain shower before completely dry.
Recommended for residential blacktop driveways, parking lots, walkways, and other exterior asphalt pavement surfaces.

Preparation: Surface must be clean and dry. Thoroughly sweep with a stiff broom. Cracks larger than hairline should be filled with a crack sealer. Crack sealer must cure before applying pavement sealer.

Application: Sealcoating may be sprayed or rolled onto the surface using a medium to heavy roller. Apply as thinly as possible, not allowing puddles to form in low lying areas. Approximate coverage rate 80-100 square feet per gallon depending on porosity of the pavement. Do not thin product.

Coating should dry in 24 hours or less, depending on temperature and humidity. Apply when temperature is above 50°F. Weather and thickness affect drying time. Do not allow traffic until coating has fully dried.

Note: 20 GALLON MINIMUM APPLIES TO THIS MATERIAL.

Gilsonite Oil-Based Sealer