Asphalt Binder Tack Coat

Manufacturer: SealMaster
Unit of Sale: 5 Gallon Pail
Asphalt Binder is an anionic asphalt emulsion designed for use as a tack coat(bonding) for patching, paving, and coating processes. Asphalt Binder promotes adhesion of bituminous concrete products and coatings.
Surface must be cleaned of dust, dirt and debris before applying Asphalt Binder.

Mixing Procedures:
Primer For Coatings:
For use as a primer for coatings (such as asphalt, coal tar, or acrylic pavement sealers) dilute Asphalt Binder with water as follows (based on 10 gallons for ease of calculation): Asphalt Binder- 10 GALS. to Water- 80 GALS.
For Use As A Tack Coat For Patching Or Paving:
Asphalt Binder- 10 gals to Water- 10 gals.

Application: Apply properly mixed Asphalt Binder (Asphalt Binder, Water) with spray equipment, brush, or squeegee. Stir material thoroughly before applying. IMPORTANT: Apply coatings, patching materials, or paving materials as soon as possible after Asphalt Binder dries (within 24 hours) in order to maintain tackifying properties.

Application Rate for Diluted Asphalt Binder:
For Use As A Primer For Coatings: Apply properly diluted Asphalt Binder (1 part Asphalt Binder, 8 parts water) at a rate of 90-130 SF per gallon.
For Use As A Tack Coat For Patching Or Paving: Apply properly diluted Asphalt Binder (1 part Asphalt Binder, 1 part water) at the rate of 90-130 SF per gallon of mix.

Note: DO NOT USE Asphalt Binder at full strength as a primer for coatings. It must be diluted with water in accordance with above mixing instructions.

Asphalt Binder Tack Coat